Siding Contractor in Washington DC: The Complete Buyer’s Guide & Top-Rated Company List
Between historic rowhouse districts, humid mid-Atlantic summers, and freeze-thaw winters, DC siding projects come with a layer of complexity most cities don’t have. We pulled together verified, independently reviewed siding companies serving the District and surrounding DMV area, broke down what each one actually offers, and ranked our top 10.
If you searched “siding contractor Washington DC,” odds are you’re dealing with one of two situations: a detached or semi-detached home in upper NW or the Maryland/Virginia suburbs that needs a straightforward replacement, or a rowhouse — possibly in a designated historic district — where the material and color you’re allowed to install is governed by DC’s Historic Preservation Review Board before a contractor can even pull a permit. Both are common in this market, and the contractor you need for one isn’t necessarily the right fit for the other.
This guide covers the DC metro’s most established siding contractors (based in the District itself, plus the Maryland and Northern Virginia firms that serve it daily), what to expect on cost, and the historic-district approval process that trips up more DC homeowners than almost anything else in this project.
Washington DC Siding Contractors — Coverage Map
Most contractors on this list serve the full DMV region — DC proper plus the close-in Maryland and Northern Virginia suburbs. A few, like Boyd Construction Co Inc, are physically based inside the District and work DC addresses daily, which can matter for historic-district paperwork and DC-specific permit familiarity.
All DC ZIP codes begin with the 200 or 205 prefix. The most frequently cited residential codes across the four quadrants:
Get Your Numbers Straight First
Walking into a quote call with your own ballpark figures is the single best way to avoid getting upsold. These free tools take a few minutes and will make every conversation below more productive.
Siding Cost Calculator
Plug in your home’s square footage and material preference to get a real, itemized price range before anyone shows up.
Run the numbers →Siding Materials Matcher
Not sure what’s realistic for a DC rowhouse versus a detached suburban home? Answer a few questions and find out.
Match my material →Repair vs. Replace Guide
If less than 30% of your siding is damaged, a full tear-off might be overkill. Find out which route actually saves money.
Check my options →Book a Free Site Visit
Skip the cold-call bidding process entirely — schedule a no-obligation on-site assessment through SidingFix.
Book my visit →The 10 Best Siding Contractors in Washington, DC
We ranked these ten based on independently published review volume and rating across Google, Yelp, and Facebook, years of continuous operation, breadth of siding materials offered, and manufacturer or industry certifications. None of these placements are paid.
BRAX Roofing
By far the largest, most consistent review base of any contractor on this list — over 460 combined reviews across three platforms, all sitting at a perfect 5.0. Installs both James Hardie and vinyl siding alongside roofing, windows, doors, skylights, and custom gutters. A National Roofing Contractors Association member.
Pros
- Largest verified review volume on this list, all perfect ratings
- NRCA member
- Full exterior package: roof, siding, windows, gutters
Cons
- Based in Gaithersburg, MD — confirm turnaround time for DC-proper rowhouse jobs
Gutterman Services, Inc.
Second-largest review volume on this list, built over nearly 40 years in business. Started as a gutter specialist and expanded into full roofing, siding, window, and door services — their technicians walk clients through siding material selection rather than pushing a single product line.
Pros
- 367+ Google reviews, high volume and consistency
- Nearly 40 years in business
- Strong gutter/siding/roofing bundling
Cons
- Sterling, VA based — farther commute for DC-proper addresses
Sunshine Contracting Corporation
Family-owned for over 30 years and a three-time Guild Master Award winner. Siding services span vinyl, James Hardie, and stone veneer, plus house wrap insulation, shutters, and full trim work — useful if you want the whole exterior envelope handled by one crew.
Pros
- Won the Guild Master Award three years running
- Large combined review volume across platforms
- Broad material range including stone veneer
Cons
- Yelp rating (3.5) trails their Google and Facebook scores — worth reading both before deciding
Crystal Exteriors LLC
A Certified CertainTeed Master Shingle Applicator working with Alside, Exterior Portfolio, CertainTeed, and James Hardie siding products. Specializes in insulated vinyl and fiber cement, which holds up well through DC’s humid summers and freeze-thaw winters.
Pros
- CertainTeed Master Shingle Applicator certification
- Near-perfect ratings on both major platforms
- Multiple premium product lines available
Cons
- Smaller review sample than #1 and #2
Phoenix Home Services Inc.
A design-build general contractor with a notably strong reputation for siding installation specifically — strong enough to have been featured in The Washington Post and Popular Mechanics. Also handles custom patios, walkways, decks, and egress windows if your siding project is part of a larger exterior renovation.
Pros
- Press coverage in The Washington Post and Popular Mechanics
- Design-build model for larger, multi-scope exterior projects
- Strong Google rating with solid review volume
Cons
- Fairfax, VA based — confirm DC city permit experience directly
HF Roofing Contractor Inc.
A perfect 5.0 rating across 175 Google reviews. Siding services cover aluminum, HardiePlank, fiber cement, and vinyl installation and repair. Partnered with BBB, CertainTeed, and GAF Materials Corporation.
Pros
- Perfect rating across a large review sample
- CertainTeed and GAF manufacturer partnerships
- Wide range of siding material options
Cons
- Roofing-first branding — confirm siding crew is dedicated, not subcontracted
Boyd Construction Co Inc
The oldest company on this list by a wide margin, operating continuously in DC since 1932, and one of the only contractors here physically headquartered inside the District. Handles siding repair, rotted wood replacement in fascias/soffits/trim, porch rebuilds, and brick/chimney waterproofing — a strong fit for older DC rowhouses with mixed exterior materials.
Pros
- Nearly a century of continuous DC operation
- Physically based in DC proper (20036)
- Deep experience with older rowhouse exterior repair
Cons
- Smaller review counts than the newer entrants on this list
American Custom Contractors
Over 50 years serving Potomac, Bethesda, Chevy Chase, and Gaithersburg, plus DC proper. Services span windows, siding, doors, sunrooms, and full exterior restorations, with BBB accreditation backing up the longevity.
Pros
- Over 50 years in continuous operation
- BBB accredited
- Also handles sunrooms and full restorations for bigger scopes
Cons
- Only Yelp review data published; check Google directly for a fuller picture
MidAtlantic Contracting Inc.
Over 45 years in business with residential and commercial capacity. EPA Lead-Safe Certification matters for DC and Maryland rowhouses built before 1978, where old paint layers under existing siding require special handling during tear-off.
Pros
- EPA Lead-Safe Certified — important for pre-1978 DC homes
- 45+ years in business
- Handles commercial scope too, if relevant
Cons
- 4.0 rating trails the top entries on this list
DryHome Roofing & Siding
Over 25 years serving the DMV, with back-to-back Houzz “Best of Service” recognition. Installs both vinyl and Hardie Board siding alongside roofing, skylights, sun tunnels, windows, doors, and gutters — a full-envelope option if siding is one of several exterior fixes you need.
Pros
- Back-to-back Houzz Best of Service awards
- 25+ years of DMV-specific experience
- Full exterior scope (roof, skylights, siding, windows, gutters)
Cons
- Yelp rating is the softest of the top 10 — read recent reviews closely
All Verified Washington DC-Area Siding Contractors
Beyond the top 10, here are additional independently verified siding contractors serving DC and the surrounding DMV. Every company below was cross-checked against its own site and at least one third-party review platform at the time of writing.
| Company | Based In | Specializes In | Website |
|---|---|---|---|
| BRAX Roofing Top 10 | Gaithersburg, MD | James Hardie & vinyl siding, roofing, gutters | braxroofing.com |
| Gutterman Services, Inc. Top 10 | Sterling, VA | Gutters, roofing, siding, windows, doors | guttermanservices.com |
| Sunshine Contracting Corporation Top 10 | Woodbridge, VA | Vinyl, James Hardie, stone veneer | sunshinecontractingcorp.com |
| Crystal Exteriors LLC Top 10 | Silver Spring, MD | Insulated vinyl, fiber cement | crystalexteriors.com |
| Phoenix Home Services Inc. Top 10 | Fairfax, VA | Design-build siding & exteriors | phoenixmason.com |
| HF Roofing Contractor Inc. Top 10 | Hyattsville, MD | Aluminum, Hardie, fiber cement, vinyl | hfroofingcontractors.com |
| Boyd Construction Co Inc Top 10 | Washington, DC | Siding repair, rowhouse exterior restoration | boydconstructionco.com |
| American Custom Contractors Top 10 | Rockville, MD | Windows, siding, doors, sunrooms | americancustomcontractors.com |
| MidAtlantic Contracting Inc. Top 10 | Woodbridge, VA | Siding, roofing, gutters, decks | macontracting.com |
| DryHome Roofing & Siding Top 10 | Sterling, VA | Vinyl & Hardie Board siding, roofing | dryhome.com |
| Siding Universe | Alexandria, VA | Siding, insulation, gutters, shutters, trim | simplysmartersiding.com |
| Beyond Exteriors | Chantilly, VA | Roofing, siding, windows, masonry | beyondexteriors.com |
| WISA Solutions | Lorton, VA | Full design-build, siding, roofing | wisadc.com |
| E&R Home Solutions | Clarksburg, MD | Siding, roofing, gutter protection | erhomesolutions.com |
| ASAP General Contractors, Inc. Verify closely | Washington, DC | Fiber cement, cedar, insulated siding | asaproofingandexteriors.com |
ASAP General Contractors is included for completeness (it’s a DC-based, insurance-experienced siding provider) but currently shows only a single published Yelp review at a low rating — request recent references directly before hiring rather than relying on the review count alone.
Directory current as of July 2026. If a company on this list has closed, changed its name, or you run a DC-area siding company that should be included, reach out through our contact form and we’ll update the listing.
Historic District Rules: The Step Most Guides Skip
This is the single biggest way a DC siding project differs from almost anywhere else in the country. Roughly a fifth of the District’s land area sits inside a designated historic district — Georgetown, Capitol Hill, Dupont Circle, Cleveland Park, Mount Pleasant, LeDroit Park, and dozens more. If your rowhouse or detached home falls inside one of these boundaries, you generally cannot simply pick a siding material and install it.
What this means in practice
Exterior changes visible from the public right-of-way — including new siding, replacement material, and even paint color in some districts — typically require review and approval from DC’s Historic Preservation Review Board (HPRB) or staff-level review through the Historic Preservation Office before the Department of Buildings will issue a permit. This process can add anywhere from a few weeks to a couple of months to your timeline, and vinyl siding in particular is frequently restricted or denied outright on street-facing elevations of historic rowhouses.
A contractor who works DC addresses regularly — not just the suburbs — will already know whether your address falls inside a historic district and can help prepare the application materials (existing condition photos, proposed material spec sheets, sometimes a mock-up) that HPRB review requires. This is one of the clearest reasons to favor a DC-based or DC-experienced contractor, like several of the top 10 above, over a suburban firm that only occasionally takes on District jobs.
Which Siding Material Makes Sense in DC?
DC’s climate swings between humid, sticky summers and genuinely cold, wet winters with regular freeze-thaw cycles. That combination is hard on materials that trap moisture or expand and contract with temperature swings — and if you’re in a historic district, your material options may already be narrowed for you before climate even enters the conversation.
| Material | Cost / sq. ft. installed | Best for | Watch out for |
|---|---|---|---|
| Vinyl | $4.50 – $8.20 | Suburban Maryland/Virginia homes, non-historic DC properties | Often restricted or denied in historic districts |
| Fiber cement (Hardie) | $9.30 – $16.90 | Rowhouses, historic-adjacent properties needing a wood look | Heavier install; needs a certified crew |
| Wood | $6.90 – $13.90 | Historic district-compliant replacement (often required) | Highest maintenance in humid mid-Atlantic climate; requires more frequent repainting |
| Stone veneer | $15 – $30+ | Georgetown & upper NW detached homes | Highest upfront cost; heavier structural load |
| Aluminum | $6 – $12 | Rowhouse trim, soffit, and fascia repair | Can dent; less common as full wall siding today |
Not sure what’s realistic for your specific address? Run it through the Siding Materials Matcher, then confirm historic-district status with your contractor before you fall in love with a material choice.
What Siding Actually Costs in Washington DC
DC and the close-in DMV suburbs run above national average on labor cost, which pushes siding pricing higher than the national baseline even before historic-district requirements (which can mandate pricier materials like real wood or premium fiber cement) enter the picture.
For a typical DC rowhouse or a mid-size detached suburban home, full siding replacement generally lands between $12,000 and $38,000 depending on material, square footage, and whether historic review adds design or documentation costs. Partial repairs to a single damaged elevation or a small storm-affected section run dramatically less — and in a historic district, a targeted repair that matches existing material is often both cheaper and faster to approve than a full replacement.
In a historic district, the fastest project isn’t always the cheapest material — it’s the one HPRB approves on the first submission.
Get a number specific to your home’s square footage and material choice with the Siding Cost Calculator before you take a single contractor call.
Common Questions About DC Siding Contractors
How much does siding installation cost in Washington DC?
Most DC homeowners pay between $12,000 and $38,000 for a full siding replacement, depending on home size, material, and whether historic district review is required. Use the cost calculator for a number specific to your home.
Do I need historic preservation approval to replace my siding in DC?
If your property is inside a designated historic district (Georgetown, Capitol Hill, Dupont Circle, and dozens of others), exterior siding changes visible from the street typically require review by DC’s Historic Preservation Office or the Historic Preservation Review Board before a permit is issued. Confirm your address’s historic status before selecting a material.
Can I install vinyl siding on a DC rowhouse?
It depends on whether the property is in a historic district. Outside historic boundaries, vinyl is generally permitted. Inside a historic district, vinyl is frequently restricted on street-facing elevations, and wood or approved fiber cement products are often required instead.
What siding material holds up best in DC’s climate?
Fiber cement (like James Hardie products) tends to perform well against DC’s humid summers and freeze-thaw winters while still achieving a historic-appropriate look, which is why several contractors on this list, including Crystal Exteriors and HF Roofing, specifically offer it alongside vinyl.
Should I repair or fully replace my siding?
As a rule of thumb, if less than about 30% of your siding shows damage, repair is usually the more cost-effective route — and in a historic district, it’s often the faster-approved option too. Walk through the specifics in our repair vs. replace guide.
Skip the cold-call bidding process
Book a free, no-obligation site visit and get a straight assessment of what your DC-area home actually needs — historic district or not.
