The Top 50 Siding Material Suppliers, Ranked and Reviewed
Every wall needs a source. This guide rounds up the manufacturers and distributors actually producing and supplying siding in North America today — what each one makes, who it’s built for, where it costs more or less, and where to find it — starting with the ten most widely specified names in the industry.
Before you commit to a name on this list, it helps to know which material you’re actually shopping for — the brand only matters once the category is settled. If you haven’t already, it’s worth spending two minutes with the Siding Materials Matcher to narrow the field, then running your home’s rough dimensions through the Siding Cost Calculator to get a ballpark before you start requesting quotes. Every material category below links out to our full guide: vinyl siding, fiber cement siding, metal siding, engineered wood siding, natural wood siding, stucco siding, and brick and stone veneer.
A note on how this list works: pricing below is given as typical installed cost ranges per square foot, gathered from industry reporting and manufacturer pricing tiers rather than a single quoted figure, because actual project cost swings widely by region, wall complexity, and installer. Treat every number here as a starting point for a conversation with a local contractor, not a quote.
Ranked 1–10The Top 10 Siding Suppliers
These ten show up on more spec sheets, more contractor trucks, and more homes than anyone else in the category. They earned the top of this list on the combination of product breadth, warranty strength, and how easy they are to actually get installed by a qualified local crew.
James Hardie
James Hardie effectively created the modern fiber cement category and still sets the pace for it. Its HardiePlank lap siding, HardiePanel vertical siding, and HardieShingle products are engineered specifically for regional climate zones (HZ5 for freeze-thaw regions, HZ10 for hot and humid ones), and its ColorPlus factory finish is baked on rather than field-painted, which is the detail most homeowners end up caring about five years in.
Pros
- Non-combustible; carries real fire-resistance value
- Resists rot, pests, and impact far better than wood or vinyl
- 30-year limited warranty, plus finish-specific coverage on ColorPlus
Cons
- Among the highest upfront costs outside masonry
- Heavy — requires specific fastening technique and experienced installers
- Cutting produces silica dust requiring proper safety precautions
CertainTeed
A Saint-Gobain company with one of the widest catalogs in the industry — CertainTeed makes everything from entry-level Monogram vinyl to its premium Cedar Impressions polymer shake and shingle line, plus insulated options under the CedarBoards and Restoration series. Its color range and profile depth make it a common default for contractors who want one supplier that can cover most budgets.
Pros
- Very broad product tiers from budget vinyl to premium polymer shake
- Strong insulated-siding lineup for energy-conscious projects
- Lifetime limited warranty on most product lines
Cons
- Entry-tier panels are thinner and more prone to long-term fading
- Premium polymer lines close much of the cost gap with fiber cement
- Warranty terms vary meaningfully by product tier — read the fine print
LP Building Solutions (LP SmartSide)
LP SmartSide is the engineered wood category’s default recommendation, and for good reason: its SmartGuard treatment runs zinc borate and resin binders through the strand core rather than just the surface, which is what gives it meaningfully better moisture and pest resistance than the wood siding it’s designed to replace. It’s sold in lap, panel, and shake profiles, primed or in 16 prefinished colors.
Pros
- Real wood look with far less moisture/pest vulnerability than solid wood
- Available in 16-foot lengths, meaning fewer seams on long wall runs
- 50-year limited warranty, among the longest in the category
Cons
- Still requires periodic caulking and repainting over its lifespan
- Not as impact- or fire-resistant as fiber cement
- Product quality perception varies by dealer/installer familiarity
Alside
Owned by Associated Materials, Alside is one of the largest siding manufacturers in North America by volume and one of the few majors that seriously plays across three categories at once: its Prodigy insulated vinyl line, Charter Oak composite cladding, and coated steel siding built specifically for storm- and hail-prone regions.
Pros
- Prodigy insulated vinyl posts strong real-world R-value gains
- Steel siding line backed by a 50-year hail damage warranty
- Wide distributor network makes product easy to source almost anywhere
Cons
- Product line is broad enough that quality perception varies by tier
- Composite cladding line is newer with a shorter track record than vinyl
- Steel siding carries a real cost premium over standard vinyl
Ply Gem
Ply Gem (now under the Cornerstone Building Brands / QXO umbrella) is a full exterior-envelope supplier rather than a single-material shop — vinyl siding sits alongside its stone veneer, windows, and trim lines, which makes it a common one-stop pick for builders doing whole-exterior projects rather than a siding swap alone.
Pros
- One supplier can cover siding, trim, stone accents, and windows together
- Strong water-resistance testing behind its core vinyl lines
- Deep builder and contractor distribution relationships
Cons
- Consumer-facing information is thinner than some competitors’ — expect to lean on a dealer
- Product naming has shifted through recent corporate ownership changes
- Not a specialist in any one high-durability material like fiber cement
Mastic Home Exteriors
A Ply Gem brand aimed squarely at the homeowner-facing side of the market, Mastic is known for its Structure insulated siding system and a large color/texture catalog under the Carvedwood and Quest lines, plus a designer accent shake series that’s commonly paired with a primary lap product for gable detailing.
Pros
- Large color and texture catalog, good for matching existing trim
- Structure insulated system adds real thermal performance
- Lifetime limited warranty on most core siding lines
Cons
- Shares supply chain and some tooling with parent brand Ply Gem — less differentiation than the separate brand name suggests
- Premium finishes narrow the price gap with fiber cement
- Regional dealer availability isn’t as universal as CertainTeed or Alside
Allura
Allura is James Hardie’s most direct fiber cement competitor, offering a comparably broad lineup — lap, panel, shake, and stucco-textured vertical panels — usually priced a step below Hardie for a similar spec, which makes it a common second quote for homeowners price-shopping the fiber cement category specifically.
Pros
- Full fiber cement lineup at a typically lower price point than James Hardie
- Same core durability profile: fire, rot, pest, and impact resistant
- Factory-primed and prefinished options available
Cons
- Smaller brand-name recognition can affect resale perception in some markets
- Regional stocking/lead times vary more than James Hardie’s
- Same installation-sensitivity and silica-dust cutting precautions as all fiber cement
Nichiha
A Japanese manufacturer with a genuinely different product angle: alongside traditional lap and shake fiber cement, Nichiha’s architectural wall panel system offers close to 18 finish styles — wood, concrete, ribbed metallic, brick, and stone-look — using a concealed fastener rain-screen system that’s popular on modern and mixed residential/commercial designs.
Pros
- Widest style range in fiber cement, including modern architectural panels
- Concealed-fastener rainscreen system built into several product lines
- Same fire and pest resistance core to all fiber cement
Cons
- Architectural panel system costs more than traditional lap fiber cement
- Less common on standard residential remodels than James Hardie or Allura
- Best results require an installer specifically familiar with its panel system
Steelscape
Steelscape doesn’t sell directly to homeowners — it’s the coil-coating supplier behind a large share of the painted steel siding panels other brands convert into finished products — but it’s worth knowing by name, because its Kynar and SMP finish systems are what actually determine how well a “steel siding” product resists fading and chalking over decades.
Pros
- Produces hundreds of millions of pounds of coated steel annually — a proven, high-volume supply chain
- Premium Kynar 500 finish options resist UV fade far better than standard paint
- Non-combustible, pest-proof base material
Cons
- Not homeowner-facing — you’ll encounter the material under a converter’s brand name, not Steelscape’s
- Scratches and cut edges need proper coating to avoid rust over time
- Among the pricier claddings once panel forming and labor are added
Eldorado Stone
Now part of Westlake Royal Building Products, Eldorado Stone has been casting architectural stone veneer from real stone molds since the 1970s, and its fieldstone, ledgestone, bluffstone, and cliffstone profiles are among the most commonly specified in the manufactured stone category — usually as a full or partial-wall accent alongside a primary siding material.
Pros
- Cast directly from real stone for genuinely convincing texture and color variation
- Far lighter and faster to install than full natural stone masonry
- Broad profile range covers most regional architectural styles
Cons
- Highest cost-per-square-foot category on this list outside full masonry
- Still requires proper flashing and drainage detailing behind the veneer
- Best used as an accent rather than full-wall cladding on most budgets
The pattern across the top 10 is worth noticing: the strongest names in fiber cement, engineered wood, and stone veneer all lean on proprietary treatment or casting processes, not just raw material choice. That processing step is usually where the price premium — and the performance gap — actually comes from.
11–20More Vinyl Siding Manufacturers
Vinyl remains the most-installed cladding in North America, and the next tier of manufacturers below the top 10 covers most of the rest of the market — from budget-friendly regional players to specialists in insulated and storm-rated panels. See the full vinyl siding guide for installation and lifespan detail.
| Supplier | What they’re known for | Typical cost |
|---|---|---|
| Royal Building ProductsVinyl & PVC trim | Broad vinyl and PVC trim catalog; strong reputation for color retention on premium lines. Pro: wide dealer network. Con: mid-tier panels feel thinner than CertainTeed’s equivalent. | $3.50–$8/sq ft |
| NorandexAssociated Materials distribution | Distribution arm of Associated Materials (Alside’s parent), often the fastest way to source Alside product regionally. Pro: fast regional turnaround. Con: not a distinct manufacturer in its own right. | $3–$8/sq ft |
| KaycanVinyl, aluminum, engineered wood | Canadian manufacturer known for its HELIOS heat- and cold-resistant panel technology, rated to extreme temperature swings. Pro: strong cold-climate performance. Con: less brand recognition in the southern U.S. | $3–$8/sq ft |
| Mitten Building ProductsVinyl, stone veneer, metal | Canadian-founded, Ply Gem-affiliated brand with one of the deepest color palettes in the category and strong stone veneer crossover. Pro: extensive color matching. Con: primarily strong in the Northeast/Great Lakes region. | $3.50–$8/sq ft |
| VariformVinyl, insulated vinyl | Recycled-content manufacturing focus with a straightforward, easy-install panel system favored by remodeling contractors. Pro: sustainability angle plus easy install. Con: fewer premium/designer profiles than CertainTeed. | $3–$7/sq ft |
| Georgia-PacificVinyl siding & accessories | Low-maintenance, UV-resistant panels backed by a limited lifetime warranty, plus a full siding-accessory catalog so a project can be sourced from one supplier. Pro: single-source project sourcing. Con: design range is narrower than specialty vinyl brands. | $3–$7.50/sq ft |
| Gentek Building ProductsVinyl, steel siding | Nearly 50 years in the exterior products business, strong in both vinyl and its SteelTek line of coated steel siding. Pro: real steel-siding depth alongside vinyl. Con: primarily distributed through Canadian and northern U.S. dealer networks. | $3.50–$9/sq ft |
| Crane Performance Siding (Celect)Cellular PVC siding | Maker of Celect cellular composite siding — a PVC-based product engineered to install without visible fasteners, closing some of the gap between vinyl’s cost and fiber cement’s rigidity. Pro: fastener-free clean look. Con: premium pricing relative to standard vinyl. | $6–$11/sq ft |
| Cornerstone Building BrandsParent group / #1 vinyl volume in N. America | The umbrella company behind several brands on this list (including Ply Gem); listed here as the largest exterior-products manufacturer in North America by volume. Pro: enormous manufacturing scale. Con: consumers rarely buy “Cornerstone” directly — you’ll shop one of its house brands instead. | Varies by brand |
| ProViaPremium vinyl & polymer siding | Known primarily for entry doors and windows, ProVia’s siding division makes a genuinely thick, premium-tier insulated vinyl line marketed on rigidity and color depth rather than price. Pro: noticeably thicker panel gauge. Con: priced closer to engineered wood than budget vinyl. | $5–$10/sq ft |
21–28Fiber Cement & Metal Siding Manufacturers
These names round out the durability-focused end of the market. Full detail on both categories lives in the fiber cement siding guide and the metal siding guide.
| Supplier | What they’re known for | Typical cost |
|---|---|---|
| CemplankFiber cement (CertainTeed brand) | CertainTeed’s dedicated fiber cement line, positioned as a value alternative to Hardie with the same core rot/fire/pest resistance. Pro: usually the least expensive true fiber cement option. Con: smaller style range than Hardie or Allura. | $5.50–$10/sq ft |
| EMCO Building ProductsSeamless steel/aluminum siding | Specializes in seamless steel and aluminum siding formed to length on-site, eliminating the overlap seams standard panels require. Pro: genuinely clean, seamless finish. Con: requires a specialty crew with seaming equipment. | $8–$14/sq ft |
| Bridger SteelCorrugated & standing-seam metal panels | Known for corrugated and standing-seam steel panels favored on modern/industrial residential exteriors, with strong custom color and profile options. Pro: distinctive modern aesthetic. Con: leans commercial-grade — smaller residential dealer footprint. | $8–$15/sq ft |
| McElroy MetalMetal wall panels & siding | Large-scale metal panel manufacturer with a wide range of residential and light-commercial wall panel profiles and finish options across multiple U.S. plants. Pro: consistent nationwide supply. Con: primarily a panel supplier — expect to source install separately. | $7–$13/sq ft |
| ATAS InternationalArchitectural metal wall panels | Architectural-grade metal panel manufacturer popular on higher-end modern residential and mixed-use projects, with strong custom fabrication capability. Pro: excellent finish and fabrication quality. Con: premium pricing aimed at architect-specified projects. | $9–$16/sq ft |
| Classic MetalsSteel board-and-batten siding | Makes a 29-gauge steel board-and-batten system with a nail-fin design that accommodates thermal expansion — a strong modern-farmhouse look. Pro: purpose-built for the board-and-batten aesthetic. Con: narrower profile range than general metal panel makers. | $7–$12/sq ft |
| Tando Building ProductsPolymer siding & shake | Makes lightweight, high-impact polymer shake, shingle, and lap siding designed to install faster than fiber cement while resisting moisture completely. Pro: won’t rot, warp, or absorb water. Con: newer to the market than fiber cement, shorter long-term track record. | $6–$11/sq ft |
| Westlake Royal Building ProductsParent group — Royal, Versetta Stone, StoneCraft | Umbrella manufacturer covering several brands on this list, including Royal Building Products and Eldorado Stone. Pro: massive combined product range under one supply chain. Con: like Cornerstone, you’ll typically shop a house brand rather than “Westlake” directly. | Varies by brand |
29–34Engineered & Natural Wood Siding Suppliers
For homeowners set on a wood look, this is the split between engineered products designed to outlast solid wood and the mills still supplying the real thing. Compare the trade-offs in the engineered wood guide and the natural wood guide.
| Supplier | What they’re known for | Typical cost |
|---|---|---|
| KWPEngineered wood siding & trim | Quebec-based manufacturer using recycled wood content with a hidden-nail profile design, operating across 18 plants. Pro: hidden fasteners give a cleaner finished look. Con: less brand recognition than LP SmartSide in the U.S. market. | $4.50–$9/sq ft |
| TruWood (Collins Products)Engineered wood siding & trim | Made by Collins, a family-owned Oregon company since 1855, using residual wood fiber with EcoGuard treatment and a 30-year limited warranty. Pro: strong sustainability story from a long-established mill. Con: recycled-content composition trails KWP on some durability comparisons. | $4–$8.50/sq ft |
| WoodtoneEngineered wood & composite siding | Known for its RusticSeries two-tone factory finish applied over an LP SmartSide substrate, giving a premium woodgrain look with factory-level color consistency. Pro: distinctive factory-applied color depth. Con: a finish layer on top of another brand’s substrate, so total cost stacks accordingly. | $5–$10/sq ft |
| MaibecNatural wood siding & prefinished shingles | Canadian manufacturer specializing in prefinished cedar and eastern white cedar shingle siding, factory-treated to reduce (though not eliminate) the maintenance burden of natural wood. Pro: factory finish cuts down on job-site painting/staining. Con: still carries natural wood’s higher long-term maintenance needs. | $8–$14/sq ft |
| Cedar Valley Shingle SystemsNatural wood shingle panels | Manufactures pre-assembled cedar shingle panel systems that install faster than individual shingle-by-shingle application while keeping the authentic cedar look. Pro: significantly faster install than loose shingles. Con: panelized systems cost more per square foot than raw shingle bundles. | $9–$15/sq ft |
| Certified Western Red & Eastern White Cedar MillsCedar Shake & Shingle Bureau members | Rather than one company, this is a certification mark — mills producing Certi-Split and Certi-Sawn graded shakes and shingles under Cedar Shake & Shingle Bureau quality standards. Pro: graded quality assurance across many regional mills. Con: sourcing and pricing vary significantly by region and mill. | $8–$16/sq ft |
35–38Stucco & EIFS Manufacturers
Traditional hard-coat stucco and modern EIFS (exterior insulation finish systems) both fall under this category. Full detail is in the stucco siding guide.
| Supplier | What they’re known for | Typical cost |
|---|---|---|
| Sto CorpEIFS & stucco finish systems | One of the most established EIFS manufacturers in the U.S., known for its StoTherm insulated finish systems and a long track record in commercial and high-end residential work. Pro: deep technical/engineering support for complex assemblies. Con: system pricing sits above traditional three-coat stucco. | $7–$12/sq ft |
| DryvitEIFS systems | A pioneer of the EIFS category, offering a wide range of textures and colors in an insulated synthetic stucco assembly. Pro: strong thermal performance built into the wall assembly. Con: EIFS requires correct drainage detailing — a frequent point of contractor error. | $7–$12/sq ft |
| Parex USAStucco, EIFS & masonry coatings | Broad coatings manufacturer covering traditional stucco, EIFS, and masonry finish systems, popular with commercial and multifamily contractors as well as custom home builders. Pro: wide technical range across coating types. Con: less consumer brand recognition than Sto or Dryvit. | $6–$11/sq ft |
| Omega Products InternationalStucco & EIFS finishes | West Coast-strong manufacturer of traditional stucco and EIFS finish coats, widely used in the dry-climate markets where stucco performs best. Pro: strong regional presence exactly where stucco makes the most sense. Con: less common outside western/southwestern markets. | $6–$10/sq ft |
39–45Brick & Stone Veneer Suppliers
Whether used as a full-wall cladding or an accent alongside another material, these suppliers cover manufactured veneer and true clay/concrete brick. See the brick and stone veneer guide for when this category makes sense.
| Supplier | What they’re known for | Typical cost |
|---|---|---|
| ProVia StoneManufactured stone veneer | Known for stone that intentionally avoids repeating patterns panel to panel, aiming for a more convincingly random, natural look than typical molded veneer. Pro: strong pattern variation reduces the “obviously fake” look. Con: premium pricing within the manufactured stone tier. | $11–$22/sq ft |
| GenStoneLightweight faux stone panels | Cast from real stone but built as a DIY-friendly, mortarless panel system — considerably lighter and faster to install than traditional veneer. Pro: genuinely DIY-installable. Con: gives up some of the depth/texture realism of heavier mortared veneer. | $8–$16/sq ft |
| Versetta Stone (Westlake Royal)Panelized stone veneer | A panelized manufactured stone system (formerly Boral) designed to install faster than traditional mortared veneer while keeping a mortared look. Pro: faster install than traditional stone veneer. Con: panel seams require careful layout planning on complex wall shapes. | $10–$20/sq ft |
| Coronado Stone ProductsManufactured stone veneer | Long-established manufactured stone veneer maker with a wide profile catalog spanning traditional to contemporary looks. Pro: broad regional distributor network. Con: standard mortared installation, so labor cost runs higher than panelized systems. | $10–$22/sq ft |
| NovikPolymer stone, brick & shake | Makes injection-molded polymer stone, brick, and shake panels — the lightest-weight option in the stone-look category and fully waterproof by design. Pro: won’t crack, chip, or absorb water like true stone veneer. Con: texture reads slightly more uniform than cast stone up close. | $7–$14/sq ft |
| General ShaleClay brick & thin brick veneer | One of the largest clay brick manufacturers in the U.S., offering both full brick and lightweight thin-brick veneer systems. Pro: true fired-clay brick, the most durable option in the category. Con: full brick requires structural support planning, not just a wall-surface swap. | $10–$25+/sq ft |
| Glen-GeryClay brick & masonry products | Another major U.S. clay brick manufacturer with deep regional distribution and a wide color/texture range across both full brick and thin veneer formats. Pro: extensive color and texture catalog. Con: same structural and cost considerations as any true masonry product. | $10–$25+/sq ft |
46–50National Building Material Distributors
These aren’t manufacturers — they’re the distribution networks that stock, warehouse, and deliver most of the brands above to local contractors. Worth knowing by name because your installer’s material pricing and lead times often trace back to one of these five.
| Supplier | What they’re known for | Role |
|---|---|---|
| ABC Supply | The largest wholesale distributor of roofing, siding, and exterior building products in the U.S., with branches nationwide stocking most brands on this list. | Distributor |
| Beacon Building Products | A major public distributor (Beacon Roofing Supply) with deep siding, roofing, and waterproofing inventory across a large branch network. | Distributor |
| SRS Distribution | Operates through a network of regional distributor brands rather than one national storefront, giving it strong local pricing flexibility in many markets. | Distributor |
| US LBM | A large diversified building materials distributor covering siding alongside lumber, millwork, and general construction supply — common in new-construction and builder channels. | Distributor |
| Foundation Building Materials | Distributes exterior and interior building products with a strong presence in commercial and multifamily siding projects alongside residential supply. | Distributor |
Not sure which of these fits your wall?
Skip the brand-by-brand comparison shopping and start with the material itself. Answer a few questions about your climate, budget, and home style, then get a real installed-cost estimate before you request quotes.
Buying guideHow to Actually Choose a Supplier
Fifty names is a lot to sort through. In practice, most homeowners narrow the field with four questions, in this order:
1. What material fits your climate and budget? This decision should come before any brand comparison. A top-tier vinyl panel and a mid-tier fiber cement panel can land at a similar installed cost, but they perform very differently in a freeze-thaw climate or a wildfire-prone zone. The Material Matcher is built specifically to answer this first.
2. Which brands does your local installer actually carry? A manufacturer’s warranty is only as good as the installer’s ability to execute it correctly, and most siding contractors are certified or trained on a small handful of specific brands. Ask which two or three brands they install most often before you fall in love with a product from this list that they’ve never touched.
3. What does the warranty actually cover? As covered in our vinyl siding guide and elsewhere on this site, material warranties (often 30 years to “lifetime”) almost always cover manufacturing defects only — not installation errors, and often not fading past a certain threshold. The contractor’s separate labor warranty, usually much shorter, is frequently the more relevant protection.
4. Get itemized quotes from at least two suppliers/installers on the same spec. “Vinyl siding” from two different manufacturers at two different price points isn’t a fair comparison unless panel thickness, insulation, and whether housewrap/flashing replacement are included are all specified the same way on both bids.
FAQCommon Questions
- Who is the biggest siding manufacturer in North America?
- By manufacturing volume, Cornerstone Building Brands (which owns Ply Gem and several other brands) is generally cited as the largest exterior building products manufacturer in North America, with the #1 position in vinyl siding volume specifically. James Hardie holds the equivalent position in fiber cement.
- Is a more expensive siding brand always the better choice?
- Not necessarily. Installation quality — correct nailing technique, proper housewrap and flashing, adequate drainage detailing — affects long-term performance more than brand name alone. A mid-tier product installed correctly by an experienced crew will usually outlast a premium product installed poorly.
- Can I mix suppliers on one project — for example, fiber cement lap siding with a stone veneer accent from a different manufacturer?
- Yes, and it’s common. Many of the projects that use stone or brick veneer (like Eldorado Stone, GenStone, or Versetta Stone) pair it with a primary siding material from an entirely different manufacturer as an accent rather than full coverage.
- Do these manufacturers sell directly to homeowners, or only through contractors?
- Most of the manufacturers on this list sell through a distributor and installer network rather than direct-to-consumer, which is part of why choosing a qualified local installer familiar with a given brand matters as much as the brand choice itself. A few DIY-oriented products (GenStone, some Tando and Novik lines) are the exception and are sold through retail channels like Home Depot or Lowe’s.
- How do I get an accurate price for my specific home?
- Use the Siding Cost Calculator for a starting estimate based on your home’s rough size and chosen material, then request itemized quotes from at least two local installers to compare real numbers for your specific wall complexity and region.
Pricing figures throughout this guide are general industry ranges intended for early-stage budgeting, not quotes from the manufacturers or distributors named. Actual installed cost varies by region, wall complexity, product tier, and installer. Company details reflect publicly available information at the time of writing and may change — always confirm current products, warranties, and pricing directly with the supplier before purchasing.
